|
|
Suction
Roll Seal Strips
Supplier:
Sawyer Industrial Plastics
The Polytron®
System "won't break...won't swell...won't wear out the
shell." The system includes Polytron K-2 Suction Roll
Seal Strips with patented Teflon® lubricator bars machined
into the wear surface; Polytron K-2 end deckles, engineered
to exacting tolerances; and superior Polytube™ Airload
Tubes. The Teflon Lubricator Bars serve in three ways:
| • |
Facilitate
rapid break-in of the new strip — small lip of Teflon
left above the upper surface conforms to the irregularities
of the inner surface of the shell |
| • |
Non-abrasive
— use of Teflon and graphite results in a very low
coefficient of friction |
| • |
Provide
a wear gauge — bars are always machined to a depth
of 0.375 inches, so that condition of the strip can be
accurately measured when roll is broken down for maintenance |
 |
Aluminum
Oxide Spreader Bars
Sawyer's
long-lasting and versatile spreader bars and shoes work
well on both machines and winders, for both OEMs and
mills.
| • |
Wear
resistant |
| • |
No
modifications needed |
| • |
Maintenance-free |
| • |
Fully-adjustable |
| • |
T-bar
and Dovetail mounts available |
|
|
|
| |
|
| |
| CONTACT
US |
| 24-Hour
Emergency Service: 1-800-356-0061 |
Email: infohnsonpackings.com |
| Headquarters:
|
21 Deer
Park Drive, P.O. Box 545, East Longmeadow, MA 01028 | 413-525-5555
| Fax: 413-525-5520 |
| Branch
Office: |
1185 Hammond
Street, Unit 4, Bangor, ME 04401 | 207-262-7110 | Fax: 207-262-7118 |
|
|
