|
 |
Style
#1298 High Performance Valve Stem Packing
Supplier:
Garlock
This
stem packing offers proven performance against
high pressures and temperatures.
| • |
LATTICE
BRAID® core provides improved integrity
and resiliency, allowing you to cut, form
and pack it without core loss |
| • |
Outer
jacket of PBC* yarn encapsulating Iconel**
wire ensures superior resistance to pressures
up to 4500psi, steam heat to 1200¡ F and chemicals
ranging from 1-12pH |
| • |
Lowers
maintenance costs through extended service
life |
| • |
Reduces
product loss through improved leakage control |
*
Trademark Celanese Corporation
** Trademark Huntington Alloys |
| |
| Specifications |
| Temperature: |
+1200°
F (+650° C) in steam,
+650° F (+345° C) in atmosphere |
| pH
Range: |
1-12 |
| Pressure: |
to
4500 psi* (310 bar) |
| Construction: |
Wire-reinforced
braid over core |
| *Functionally
tested to 4500 psi at 1200° F steam.
Consult Garlock Engineering for critical
and control valve recommendations.
(1
inch = 25mm, 1 ft. = .3m) |
|
|
|
Flexible
Graphite Packings
Supplier:
Garlock Sealing Technologies
Style
1303-FEP
Superior
performance and convenience for the hydrocarbon, chemical
processing and power generation industries.
| • |
Compliance
with the most stringent VOC and VHAP emissions regulations |
| • |
Thermally
conductive; resists heat, pressure and chemicals |
| • |
Fire
safe |
| • |
Dimensionally
stable, impervious to gases and fluids |
| • |
Non-scoring,
self-lubricating, non-hardening |
| • |
Handles
easily, retains integrity when cut and formed |
| • |
No
end rings required
|
| Specifications |
| Temperature: |
-328°
F (-200° C) to +1200° F (+650° C) steam;
+850° F (+455° C) atmosphere |
| pH
Range: |
0-14
(except strong oxidizers) |
| Pressure: |
4500
psi (320 bar) |
Style
1304
High-performance spool stock packing for both pumps
and valves. Tough and versatile, ideally suited for
the pulp and paper, mining, primary metals and power
generation industries.
| • |
Handles
both rotary and valve service |
| • |
Non-hardening,
self-lubricating, dimensionally stable |
| • |
Easy
to cut and install |
| • |
Dry
running capability |
| Specifications |
| In
Pumps: |
| Temperature: |
-328°
F (-200° C) to +850° F (+455° C) |
| pH
Range: |
0-14
(except strong oxidizers) |
| Pressure: |
500
psi (34 bar) |
| Shaft
Speed: |
4000
FPM (20 m/s) |
| In
Valves: |
| Temperature: |
-328°
F (-200° C) to +850° F (+455° C) |
| pH: |
0-14
(except strong oxidizers) |
| Pressure: |
3000
psi (205 bar) rotary |
|
|
QUICKSET®
9001 Valve Packing Sets
Supplier:
Garlock Sealing Technologies
These
GRAPH-LOCK® Engineered Sets feature the patented
"cup & cone" ring design, which increases
radial expansion of the sealing rings up to 1/3"
(3.2mm). I.D.- and O.D.-specific pure graphite rings
mean low friction for longer equipment life and superior
sealing at high temperatures.
| • |
Preassembled
and ready to install |
| • |
Meets
global emissions standards |
| • |
No
measuring, cutting or waste |
| • |
Forty
popular sizes fit the majority of valves |
| Specifications |
| Temperature: |
to
+1200° F (+650° C) steam; to +850° F
(+455° C) atmosphere |
| pH
Range: |
0-14
(except strong oxidizers) |
| Pressure: |
to
10,000 pis plus (690 bar) |
|
|
| Style
8093 DSA Pump Packing
Supplier:
Garlock Sealing Technologies
Patented
"cup & cone" rings expand radially to form
a positive seal against both shaft and box bore. Available
in a wide range of sizes and a choice of braids and
gasket spacers for resistance to variety of media.
| • |
Reduces
equipment wear and maintenance |
| • |
Flexible,
graphite rings conduct heat away from the shaft,
so equipment runs cooler and longer |
| • |
Significantly
reduces leakage |
Our
8093 DSA set is the technically preferred solution;
however, when spool stock is required, Style #1304 would
be the best choice.
| • |
Self
lubricating |
| • |
Eliminate
flush water |
| • |
Drastic
reduction of leakage |
| • |
No
equipment modification needed |
| • |
Reduce
equipment wear and maintenance |
| • |
Compatible
throughout a wide range of chemicals |
| • |
Availability
in a wide range of sizes |
| Specifications |
| Temperature: |
+500°
F (+260° C) |
| pH
Range: |
0-14*
(except strong oxidizers) |
| Shaft
Speed: |
4000
fpm plus (20 m/s) |
| Pressure: |
500
psi (35 bar) |
| *consideration
should be given to braid choice |
|
|
Carbon
Packings
Supplier:
Garlock Sealing Technologies
Style
98
This
tough and versatile packing withstands a wide variety
of chemicals. Common applications include centrifugal
pumps, agitators, ball, globe, gate and plug valve stems,
oil drilling and down-hole tools. Handles acids, strong
caustics, hot oils, solvents and boiler feed.
| • |
Low
coefficient of friction for longer equipment life |
| • |
High
thermal conductivity means process runs cooler,
and packing lasts longer |
| • |
Low
chloride certification available |
| • |
Additional
abrasion resistance available |
| Specifications |
| Temperature: |
-200°
F (-130° C) to +850° F (+455° C) atmosphere;
+1200° F (+650° C) steam |
| pH
Range: |
0-14
(except strong oxidizers) |
| Shaft
Speed: |
to
4000 fpm plus (20 m/s) |
| Pressure: |
to
500 psi (35 bar) (rotary/centrifugal)
valve pressure to 2500 psi (170 bar) |
| Construction: |
LATTICE
BRAID® |
Low
chloride certification available.
For increased abrasion resistance, use Style
#98-PBI* |
| *PBI
yarns are braided into the corners |
Style
5000
A tough, but low abrasion carbon fiber packing impregnated
with PTFE and treated with a high-temperature break-in
lubricant. Developed for long service against strong
caustics, acids, slurries and any application where
contamination is prohibited. A favorite of the pulp
and paper industry. Applications include: slip joints,
mixers, agitators, reactors, autoclaves, centrifugal
pumps and hydro-electric turbines. Service includes
strong caustics, acids, stock, bleach, hypo and slurries.
| • |
Low
abrasion and high chemical resistance, for long
service |
| • |
Low
chloride certification available |
| • |
Extra
abrasion resistance available |
| Specifications |
| Temperature: |
-200°
F (-130° C) to +600° F (+315° C) |
| pH
Range: |
0-14
(except strong oxidizers) |
| Shaft
Speed: |
to
3000 fpm plus (15 m/s) |
| Pressure: |
to
500 psi (35 bar) (rotary/centrifugal) |
| Construction: |
LATTICE
BRAID® |
Low
chloride certification available.
For increased abrasion resistance, use Style
5000-PBI* |
| *
PBI yarns are braided into the corners |
|
|
PTFE
Packings
Supplier: Garlock Sealing
Technologies
Style
5888
This
high-density, dimensionally stable packing absorbs very
little water and is well-suited to valve and slower
shaft speed applications, such as check and needle valve
stems, reciprocating rods, rams and plungers and rotary
applications.
| • |
PTFE
dispersion ensures a low friction finish and prevents
leakage through the braid |
| • |
Resistant
to most chemicals |
| Specifications |
| Temperature: |
-450°
F (-270° C) to +500° F (+260° C) |
| pH
Range: |
0-14 |
| Shaft
Speed: |
to
1000 fpm plus (5 m/s) |
| Pressure: |
to
300 psi (20 bar) (rotary/centrifugal)
to 2000 psi (140 bar) (valves) |
| Construction: |
LATTICE
BRAID® |
| For
Oxygen Service, specify Style 5898. |
Style
5889
This non-abrasive packing is an excellent choice for
high-speed rotary shaft service.
| • |
Pre-shrunk
to avoid packing wear and shaft scoring |
| • |
Soft
and flexible, but very nonporous |
| • |
Not
recommended for chlorine service |
| Specifications |
| Temperature: |
-450°
F (-270° C) to +500° F (+260° C) |
| pH
Range: |
0-14 |
| Shaft
Speed: |
to
1500 fpm plus (8 m/s) |
| Pressure: |
to
300 psi (20 bar) (rotary/centrifugal) |
| Construction: |
LATTICE
BRAID® |
|
|
SYNTHEPAK®
Packing
Supplier:
Garlock Sealing Technologies
This
unique spun synthetic fiber packing is the ideal replacement
for asbestos. It gives superior performance for pumps,
valves, rods, plungers, rams and expansion joints.
| • |
Reduction
in shaft and sleeve wear lowers operating costs |
| • |
Versatile,
multi-use packing means lower inventory stocking
costs |
|
|
Style
1925 Blended Packing
- Designed for Abrasive Service
Supplier:
Garlock Sealing Technologies
This
premium performance packing is an innovative blend of
two yarns.
| • |
Fiber-infused
PTFE yarns offer abrasion resistance and thermal
stability |
| • |
Exclusive
SYNTHEPAK® yarns retain flexibility and resilience
and ensure even load distribution |
| • |
Longer
packing and equipment life mean significant cost
savings |
| Specifications |
| Temperature: |
-450°
F (-270° C) to +500° F (+260° C) |
| pH
Range: |
0-13 |
| Shaft
Speed: |
2500
fpm (10 m/s) rotary/centrifugal |
| Pressure: |
300
psi (20 bar) |
| Construction: |
LATTICE
BRAID® fiber-infused PTFE yarns and SYNTHEPAK®
yarns. PTFE dispersion and snow white petrolatum
break-in lube. Available in spool stock or pre-cut
sets, 1/8" - 2" (3.2 mm - 51 mm) cross
sections. |
| Gasket
Spacers (optional) |
| Material: |
PTFE-based
(GYLON® 3510 is recommended) |
| Thickness: |
1/16"
(1.6 mm) |
| Tolerance: |
I.D.
+1/16", -0" (+1.6 mm, -0 mm)
O.D. +0", -1/32" (+0 mm, -0.8 mm) |
|
|
Garlock
Die-Formed Rings
Garlock
can produce die-formed rings in over 5000 sizes.
When
placing your order, specify the I.D., the O.D., the
ring/set height (and density if necessary). |
|
Soot
Blower Sets
Supplier:
Garlock Sealing Technologies
This
compression packing is designed for exceptional reliability
in a severe environment.
| • |
Die-formed
conical center rings (45°) and top and bottom
adapters simplify installation and ensure accurate
fit |
| • |
Rugged
materials give extended service life and reduce
downtime and maintenance |
|
|
| GFO™
Fiber Packing
Supplier:
W.L. Gore & Associates, Inc.
Use
of this universal compression packing reduces
downtime and cuts maintenance costs. Made from
long-lasting non-asbestos GFO fiber, it dissipates
frictional heat and runs cool even after extended
periods of continuous operation at shaft speeds
up to 4,300 fpm (21.8m/s). Useful in a wide variety
of sealing applications, it is ideal for applications
in contamination-sensitive processes.
| • |
Resistant
to most chemicals |
| • |
Capable
of tolerating temperatures up to 550°
F (288° C) |
|
 |
|
|
 |
Mechanical
Packings
Supplier:
JM Clipper
Johnson
Packings offers this manufacturer's complete line
of braided packing for rotating and oscillating
equipment, hydraulic and reciprocating equipment
and valves. A full choice of braid styles, materials,
temperature limits, pH ranges and pressure limits
ensures the availability of packing suitable for
virtually any application. |
|
|
| Sequel™
Packing
Supplier: W.L Gore &
Associates, Inc.
This
pure white fiber packing combines high performance
and purity.
| • |
Thermal
conductivity at least three times greater
than PTFE packings |
| • |
Operating
temperatures from -400° to 550° F
(-240° to 288° C) |
| • |
Outstanding
chemical resistance, 1-14 pH |
| • |
Low
thermal expansion |
| • |
High
lubricity |
| • |
Shaft
speeds up to 3,000 fpm (15.25 m/s) |
| • |
Nonflammability |
| • |
Galvanic
corrosion resistance |
| • |
Meets
FDA requirements |
|
 |
|
|
Garco
Packing Tools
This
complete line is designed for easy packing maintenance.
| • |
Interchangeability
of tips with flex or rigid holders for versatility |
| • |
Worn
or damaged tips may be replaced at minimum cost |
| • |
Available
in three different sets to suit a wide variety of
applications |
Other
Garco products also available from Johnson Packings:
| Guillotine
Packing Cutter |
| • |
Easily
cuts all packing, including Kevlar, copper sheathed
and wire core packing |
| • |
Direct-reading
diameter/circumference scales eliminate expensive
waste of time and material that results from trial-and-error
fitting |
| |
|
| Gasket
Punch Set |
| • |
Effortlessly
cuts concentric gaskets and washers from non-metallic
materials and soft metals. |
|
|
|
HYDRA-JUST™
SEALING SYSTEM
Supplier:
Garlock
HYDRA-JUST™ is
a composite sealing set that utilizes a combination
of Garlock's premium products. When applied
correctly, it offers unparalleled service life.
A combination of gasket spacers, Style 1333-G
packing and Garlock's patented "cup and
cone" GRAPH-LOCK® packing set makes
this the perfect choice for your critical pump
applications.
| • |
Performs
routinely in hostile applications where
mechanical seals have not performed satisfactorily
in the past |
| • |
Uses
minimal water and does not migrate to the
media, avoiding expensive flushing and
positively impacting your recovery costs |
| • |
Will
not damage your equipment, reducing replacement
part costs |
| • |
Adjustable;
lasts longer than packing and mechanical
seals |
HYDRA-JUST™
is ideal for:
| • |
Slurries
and non-clarified media |
| • |
Mechanical
seal replacement |
| • |
Refiners |
| • |
Bottom
outlet devices |
| • |
Kaymr
digesters |
| • |
General
industry |
|
 |
|
Specifications
|
| Temperature: |
to
500° F (260° C) |
| pH
Range: |
0-14
(except strong oxidizers) |
| Shaft
Speed: |
to
4,000 fpm plus (20 m/s) |
| Pressure: |
to
500 psi (35 bar) |
|
|
| |
|
|
|
| |
|
| |
| CONTACT
US |
| 24-Hour
Emergency Service: 1-800-356-0061 |
Email: infohnsonpackings.com |
| Headquarters:
|
21 Deer
Park Drive, P.O. Box 545, East Longmeadow, MA 01028 | 413-525-5555
| Fax: 413-525-5520 |
| Branch
Office: |
1185 Hammond
Street, Unit 4, Bangor, ME 04401 | 207-262-7110 | Fax: 207-262-7118 |
|
|
