•	Aerosol spray provides easy application on gaskets, nuts and bolts
•	Withstands high temperatures (1000°F/538°C)
•	Broad chemical compatibility with no change in sealability
•	Reduces gasket adhesion to flanges

Garlock's Anti-Stick Spray is the cleaner, safer alternative to traditional anti-seize compounds for use on gaskets, nuts and bolts. Its broad chemical compatibility and ability to withstand temperatures up to 1000°F (538°C) make this Anti-Stick Spray ideal for your industrial lubrication needs.

When used with gaskets, Garlock's spray reduces gasket adhesion to flanges, and it does not fill in the radial grooves on flanges as other anti-seize compounds do. Gasket removal is easier — you no longer have to waste time and risk damaging equipment by scraping and grinding gaskets from flanges. Full gasket removal ensures that the integrity of the seal isn't compromised by installing new gaskets over the remains of the old gaskets.

Using traditional anti-seize compounds (grease embedded with metallic particles) on gaskets can cause serious problems. This type of anti-seize compound, meant for nut and bolt assemblies, can chemically attack some gaskets and can cause the gasket to crush during installation. These compounds can also fill up the flange serrations, causing them to blow out prematurely. The specially designed formula of Garlock's Anti-Stick Spray ensures that your gaskets, as well as nuts and bolts, provide high performance and release easily.

When applied to nuts and bolts, this Anti-Stick Spray achieves torque values almost identical to those of grease-based thread lubricants. As with other lubricating products, nut and bolt threads should be free from greases and oils prior to application.

Available in 20 oz. spray cans, Garlock's Anti-Stick Spray is shipped in 12-unit cases. Average spray coverage is 73.5 sq. ft. per can. For more information, contact your Johnson Packings sales representative.

ONE-UP® Pump Diaphragms from Gore are Flexible, Dependable and Affordable

Gore's ONE-UP® pump diaphragm, with its single-piece construction, will deliver significantly longer service life when installed in air-operated diaphragm pumps. Construction of patented PTFE bonded to a reinforced rubber backing ensures improved strength and flexibility that translate into significantly longer service life.

ONE-UP's one-piece design eliminates any chance of layer separation. Liquids can't seep between layers to destroy the integrity of the diaphragm, and the chance of abrasion between layers is nonexistent.

This single-unit design, consisting of proprietary PTFE on the wetted side for a solid fluid barrier, bonded to a reinforced rubber backing (of either Neoprene, EPDM or Viton), means that the diaphragm will not develop flex stress or deformation. Another construction feature, the patented ribbed design, evenly disperses stress to extend the life of the diaphragm. In fact, controlled studies to ASTM standards show that the ONE-UP's flex life and impact strength are 10 times superior to standard PTFE diaphragms, and its burst strength is 3 times greater.

ONE-UP pump diaphragms are suitable for use with any chemical (0-14 pH) at temperatures from -20°F to 350°F (-29°C to 176°C). Resistance to acids, including caustic soaps and sanitizers, means that cleanup is simple.

Ideal for general service pumps that perform many different functions, the ONE-UP pump diaphragm has been field-tested in a wide variety of industries, including food & beverage processing; pharmaceuticals; paint, solvent & detergent manufacturing; and wastewater treatment. These pump diaphragms comply to FDA 21 CFR 177.1550 (PTFE) requirements for food.

Whether it incorporates bolt holes or a perimeter sealing bead, the ONE-UP fits easily into the pump housing without the difficulties that come with installing two-piece diaphragm sets.

ONE-UP pump diaphragms are available for air-operated diaphragm pumps from Almatec, ARO, DEPA, Biagdon, Flotronics, Graco, Verder, Versamatic, Warren Rupp, Wilden and Yamada. Contact Johnson Packings to see how you can incorporate ONE-UP pump diaphragms into your system today.

If your shutdown is right around the corner, don't be unprepared again! Johnson Packings can provide: • Valve, gasket and pump surveys prior to shutdown • Quick order turnaround • Same-day shipments • In-house gasket fabrication, including soft gasketing of cork, Gylon®, rubber and more

To avoid aggravating problems during shutdown, talk to your customer service representative today to save time and money. We will work with you to ensure that the right product is ordered and received before your shutdown begins.

Mark your calendars and visit us at the following trade shows:

• Sept. 26-27 — Maine Industrial Show, Bangor Auditorium, Bangor, ME
• Nov. 9 — IMI Vendor Night, Chateau Provost, Chicopee, MA