GORE-TEX® Joint Sealant

This original form-in-place gasketing material can be used practically everywhere. It is easy to install, even on vertical surfaces, and is ideal for large, complex or damaged flanges. Since there is no waste, this joint sealant usually costs less, on a per-gasket basis, than any other gasketing alternative. This material is fabricated from expanded PTFE, with a highly fibrillated structure that, upon compression, forms a solid homogeneous mass that is impervious to gases and liquids.

GORE-TEX® Series 300/600 Gasket Tape

Series 300 gasket tape helps to achieve greater sealing efficiencies with large steel piping and equipment. Unlike sheet gasketing, it can be quickly formed in place, installs easily and reduces expensive material scrap. Conformable and highly compressible, this tape forms a very tight seal. Strong multi-directionally expanded PTFE fibers give excellent creep resistance for a long lasting seal that withstands virtually any chemical process. It is an ideal choice when sealing large diameter flanges.

Series 600 gasket tape is intended for glass-lined equipment and guards against premature gasket failure. Unlike PTFE envelope gaskets, it will not degrade due to chemical attack and will ensure a tight and long-lasting seal. The entire gasket is chemically inert, so the user will not experience the sealing problems associated with aggressive media or outside environment. It conforms to the imperfections common in glass-lined flange surfaces, while maintaining dimensional stability for superior sealing reliability.

GORE-TEX® TriGuard™ Gasketing

TriGuard™ gaskets are used to seal fragile pipe flanges with low bolt load. Unlike other gaskets, they seal tight and stay tight, even with varying flange conditions. Designed for low stress-to-seal flanges, these gaskets are unaffected by most aggressive chemicals and are ideal for contamination services and highly permeable fluids, including chlorine and monomer service.