|
|
| Supplier:
Parker-Hannifin |
|
|
|
|
|
|
|
Now
carrying Parker Adhesives & Sealants!!!
|
|
(Comparable
to Loctite® & Permatex® Products)
|
|
|
| |
|
|
|
|
|
|
Compression
Packing Installation Kit
Supplier:
Garlock Sealing Technologies
Garlock
assembled this kit specifically to provide millwrights
and pump mechanics with the specialty tools they need.
| • |
Includes
flashlight with inspection mirror, measuring devices,
lubricant, packing hooks and picks and six split
urethane extended bushings or pusher tools to seat
the packing |
| • |
Comes
in sturdy plastic box, large enough to accommodate
additional items, such as wrenches, rags and other
supplies |
|
|
|
Allpax
Gasket Cutter
This
tool saves money and costly downtime by enabling anyone
to cut accurate gaskets, quickly and efficiently, on
the job, when they are needed.
| • |
Cuts
all gasketing materials, including compressed non-asbestos,
cork, rubber, Teflon® and fiber |
| • |
Available
in six convenient kits, each packed in a metal box,
to meet a broad range of cutting requirements |
| |
|
| |
Style
No. 1 — capacity to 12" |
| |
Style
No. 2 — capacity to 24" |
| |
Style
No. 3 — capacity to 36" |
| |
Style
No. 4 — capacity to 48" |
| |
Style
No. 5 — capacity to 60" |
| |
Style
No. 6 — capacity to 12" |
|
|
|
Pre-Cut
Shims
Supplier:
Aloma Shim and Manufacturing
Pre-cut
shims protect equipment from misalignment, downtime
and resulting damage. All Aloma pre-cut shims
are free of burrs for safety.
| • |
Accurate
shim thickness without measuring with a micrometer |
| • |
Hold
the closest tolerances in the industry for
both thickness and flatness |
| • |
Manufactured
from 304 stainless steel for added corrosion
resistance |
| • |
Slot
sizes are 1/16" oversize to provide proper
bolt clearance |
| • |
Permanently
etched in inches and millimeters |
| • |
"Trailer
Hitch" tab design provides safe handling |
| • |
Eliminate
shim stock material waste and reduce alignment
labor costs |
|
 |
| Standard
Pre-Cut Shim Options |
| Shim
Size |
Maximum
Bolt Size |
Slot
Size |
Shim
Dimensions |
| AA |
3/8" |
7/16" |
1-1/2"
x 1-1/2" |
| A |
1/2" |
9/16" |
2"
x 2" |
| BB |
5/8" |
11/16" |
2-1/2"
x 2-1/2" |
| B |
3/4" |
13/16" |
3"
x 3" |
| C |
1-1/8" |
1-3/16" |
4"
x 4" |
| D |
1-1/2" |
1-9/16" |
5"
x 5" |
| E |
1-7/8" |
1-15/16" |
6"
x 6" |
| G |
2-1/4" |
2-5/16" |
6"
x 6" |
| H |
2-1/4" |
2-5/16" |
8"
x 8" |
| ALOMA
Tolerance Standards |
| Shim
Size |
ALOMA
Tolerance |
AISI
Tolerance |
| 0.050 |
0.050
± 0.002 |
18
GA 0.048 ± 0.003 (typical 0.046) |
| 0.075 |
0.075
± 0.002 |
14
GA 0.072 ± 0.003 (typical 0.071) |
| 0.100 |
0.100
± 0.004 |
12
GA 0.105 ± 0.005 (typical 0.102) |
| 0.125 |
0.125
± 0.004 |
11
GA 0.119 ± 0.005 (typical 0.117) |
|
|
|
Spearhead®
321 Dove-Tail Punch Set
This
set can be used to punch perfect, strong Dove-Tails
in gaskets from any pliable material. Only one cut is
needed, with no premeasuring, marking or scoring.
| • |
Ideal
when the outside diameter of gasket is larger than
the width of the material being cut |
| • |
Open-view
design eliminates any guesswork by allowing a full
line of vision at all times |
| • |
Produced
by grinding rugged, heavy gauge high alloy steel
to a finely honed cutting edge and heat treating
it to precise standards |
| • |
Set
of three punches covers a range of 3/4" to
3" flanges |
|
|
|
Spearhead®
130 Power Punch MAXiSET™
The
Arch Punch MAXiSET is engineered and manufactured to
make cutting bolt holes and washers easier, safer and
more efficient while providing clean, accurate cuts.
It is the only arch punch set with a centering pin to
allow cutting of concentric-accurate washers and provide
for precise bolt hole spacing.
| • |
Contains
13 black tempered special alloy steel punches, with
extremely durable, finely-honed cutting edges, to
cut all non-metallic gasket materials and all thin,
soft metals |
| • |
Includes
a tough, impact-absorbing Genuine Punch Pad that
is designed for long life and ease-of-use in the
toughest working environments |
|
|
|
Garco
Packing Tools
This
complete line is designed for easy packing maintenance.
| • |
Interchangeability
of tips with flex or rigid holders for versatility |
| • |
Worn
or damaged tips may be replaced at minimum cost |
| • |
Available
in three different sets to suit wide variety of
applications.
Available in three different sets to suit wide variety
of applications |
Other
Garco products also available from Johnson Packings:
| Guillotine
Packing Cutter |
| • |
Easily
cuts all packing, including Kevlar, copper sheathed
and wire core packing |
| • |
Direct-reading
diameter/circumference scales eliminate expensive
waste of time and material that results from trial-and-error
fitting |
| |
|
| Gasket
Punch Set |
| • |
Effortlessly
cuts concentric gaskets and washers from non-metallic
materials and soft metals |
|
| |
|
|
|
|
| |
|
| |
| CONTACT
US |
| 24-Hour
Emergency Service: 1-800-356-0061 |
Email: infohnsonpackings.com |
| Headquarters:
|
21 Deer
Park Drive, P.O. Box 545, East Longmeadow, MA 01028 | 413-525-5555
| Fax: 413-525-5520 |
| Branch
Office: |
1185 Hammond
Street, Unit 4, Bangor, ME 04401 | 207-262-7110 | Fax: 207-262-7118 |
|
|
